Copper Bonded Rods

Specialist in Copper Bonded Rods, Copper Rods, Copper Pipe, Ground Rods, Copper Earthing Electrodes. Low impedance grounding is essential to protect transmitting facilities and personnel from external or internal electrical anomalies. Copper clad driven ground rods are often insufficient due to high ground resistively or a limited installation area.

Most models of the JMV Copper Rods are immediately available and can be shipped for overnight delivery. Ground wire attachment options include a two hole copper buss bar. Optional inspection wells are available.

Copper Bonded Earth Rods Earthing rods Grounding Accessories Earthing Rod.

Copper Bonded Grounded Rods probably offer to the installer the best and the most economical earth rods available. They are made molecularly bonding 99.98 pure Electrolytic Copper (CU) on to a low carbon steel core to thickness up to 0.35mm. They are highly resistant to corrosion, and because the steel used has a very high tensile strength, they can be driven by power hammers to great depths. One common misconception is that the dia of the rod has a drastic effect on lowering earth resistance. This is not True! Use strength and to maintain the durability. The Universily Used thread rolling process raises the surface of the rod. Thus thread dia is greater than rod dia.

Features

JMV Earth Rods are made from high tensile-low carbon steel compiling with requirements of BS 4360 Grade 43 A. Each rod is molecularly bonded by 99.99% pure, high conductivity copper bonding, each rod is treated with Benzol-triozole derivatives. Threads on rods are formed by roll threading process, giving threads extra strength, eliminating risk of chipping the threads while driving the rods in the ground.

Accessories

Sectional Copper Bonded Rods

For deep driving to depths necessary to obtain good conducting level for uniform low-resistance grounds. The features are same as of Pointed/Plain Copper Bonded Rods. Cold-rolled threads at each end for joining the various lengths of rods together with couplings. Cold-rolled threads (stronger than cut threads) provide the added strength of continuous, unbroken grain flows.

Specifications

Standard Ground Rod Clamps

Designed for Copper Bonded Rods, suitable for direct burial, high-strength bronze alloy, corrosion resistant, provided low resistance copper to copper connections. Clamps are fitted with non ferrous screws for longer life.

Specifications

High Strength Ground Rod Couplings

Bronze threads, Both ends chamfered, Corrosion resistant alloy, for use with sectional ground rods ensures low resistance copper to copper connect.

Specifications

Driving Studs

High strength carbon steel, designed for driving sectional rods. Withstands hammer impact.

Specifications

Rod to Tape Clamp

Corrosion resistance, conductivity and mechanical strength are essential considerations in clamp design to ensure an earthing system remains operative for many years.

B Bond

For Bonding tape to steel structures

U Bolt Rod Clamp

‘U’ Bolt threaded M10. CR320 includes additional plate to allow tape to be clamped without drilling.

Brass Earth Clip

Domestic Rod Earth Clip Suitable for cables in the range 4 - 25mm2

Advantages

• Values over the life of the product
• Up to ten times the conductivity of a driven rod
• Three times the service life of a driven rod
• Reduced installation area and time
• Overnight delivery
• Stable impedance

Applications

Low impedance Earthing system for:

• Lightning protection
• AC power systems
• Static discharge and transient currents